Knauf Knauf

GIFAFLOOR

Weiter

GIFAfloor FHB - Stable on the floor

GIFAfloor FHB
When you need to save time by installation

Are you in a hurry to implement your construction project? Then GIFAfloor FHB is just what you need!

The high speed of the installation of this single layer hollow floor enables rapid completion. Installations are accessible at all times thanks to the immediate or later combination with Knauf Integral GIFAfloor BD, for example in corridors or as an installation route. For maintenance or extension of the underfloor network, electric sockets, outlets and inspection opening can be installed at any point on the floor. Naturally, drywalling systems can be constructed on the GIFAfloor FHB.

The structure of the F181 system consists of single layer GIFAfloor FHB gypsum fibre elements in the format 600 x 1200 mm on steel supports.

The elements are laid staggered and with their evenly sanded surface are ready for almost any top covering overnight.

They come with standard thicknesses of 25, 28, 32 and 38 mm and have tongue-and-groove edges.

The individually adjustable supports are usually glued to the raw floor with a distance of 600 x 600 mm.

Single layer GIFAfloor hollow floors are especially suitable for small rooms and rooms where there is a high level of wastage due to cutting.

GIFAfloor FHBplus 2-layer hollow floor
For sensitive flooring

Do you need the right sub-floor for your room concept with e.g. sensitive natural stone or ceramic floors? You can depend on GIFAfloor FHBplus! With its double layer structure, this floor system has no cross-joints or continuous joints and is very comfortable to walk on. By changing the thickness and/or the density of the two layers, this floor can be designed for any load class. Supply installations are accessible at all times thanks to the immediate or later combination with Knauf Integral GIFAfloor BD, for example in corridors or as an installation route. The second layer can be installed at a later date at any time. Because of this, the first layer serves as a construction and transport level for other construction work. The structure of the F182 system consists of single layer GIFAfloor gypsum fibre elements in the format 600 x 1200 mm on steel supports.

The individually adjustable supports are usually glued to the raw floor with a distance of 600 x 600 mm.

The supporting flooring elements are provided with a tongue-and-groove profile and have a minimum thickness of 25 mm.

The 13 or 18 mm thick LEP flooring elements of the second layer are provided with a rebated edge and are fully adhered to the surface of the support level elements.

For maintenance or extension of the underfloor network, with this system electric sockets, outlets and inspection openings can be retrofitted at any point in the floor.